Building A Modular Home

with Express Modular

Modular Construction of your new Hermiston home will require considerable and specific planning that should be completed in the beginning strategy. Your new dwelling will comply with all of the local building code requirements but you’ll need to prepare for the perimeter line locations, and obtain all usual construction permits. In addition, you will need to identify soil type and conditions, water table as well as frost line so as to produce your new design.

Your planning needs to feature purchasing property or home along with pinpointing where you can set your house on the site. Being the property owner, you will need to also develop a plan for the building of the perimeter foundation wall structure, that must be properly square to be able to support the modules when installed. One particular essential piece of the plan would be to have a 30-foot diameter area positioned in close proximity to the foundation and devoid of trees and wires which is completely level so that you can position the building crane employed to set all of the components around the footing.

Don Beck Modular Home Consultant

Hello, I am Don Beck, your Modular Home Consultant for Hermiston, Oregon. If you have any questions, please call me toll free!

Designing A New Modular Home

The design of a new modular home starts with establishing the Wind Zone, Thermal Zone and Roof Load Zone of your development location. These must be incorporated in the design from the outset, as well as integrated into any engineering phase in the plan. You will need designs for your attached garage areas, verandas or outdoor patios as they are not an element of the modular home plan. It is important for you to list what you need to plan into the home so it can be established that these can be included in your plan.

There are no limits to the size of to the plan with modular homes; presently there are layouts as large as 1500 to 3000 sq . ft . built in Thirty-two modules, with your typical range between 4 to 6 thousand sq ft in ten to twelve sections. Each house plan Express Modular makes available are designed in this way, including our modular log homes and our many enviro-friendly home options.

Beginning Install of A New Prefabricated Dwelling

Once the construction of the modules is complete and they’re transported to your home location we start the crucial phase of your assembly – the setting of the modules by the installation crew utilizing construction crane gear. When these are installed, the last stage of the installment will be the completing installing utilities, painting, installing all the floors, as well as the installation of the appliances. Cleansing and testing makes certain all things are in excellent working order and that the final inspections and occupancy permits can be completed. Usually, the outer perimeter drive way, patios, paths and decking are installed to complete the project and the house is set for moving in.


The Eco-Friendly Modular Home

Express Modular homes are designed “greener” and are more energy-efficient compared to traditional homes of the past. The insulation and other elements included in production are manufactured in the your home from inception. Energy efficient home appliances are standard and, using upgrades,your home will become even more eco-friendly. The climate control manufacturing environment as well as reclaimed materials offer additional possibilities for an environmentally friendly abode. With low flow fixtures on faucets, shower heads and sinks, choosing green modular homes shouldn’t be too difficultto make. Approximately fifty green home labeling programs around the country offer interesting and important aspects to building green. Check them out to see if one can help provide you more information.

All the heat retaining material and additional elements used in manufacturing are built into the residence right from the start. Energy efficient appliances will be common and using upgrades,your residence will become more eco-friendly. Both climate control production environment and re-cycled materials offer added opportunities for an enviro-friendly residence. With low flow fittings on faucets, shower heads and sinks, choosing green modular homes is easy.

We Manufacture Modular Homes in Hermiston

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)