Building A Modular Home in Barnesville

with Express Modular

Modular Building of your brand-new Barnesville residence will need substantial and specific planning that should be completed at the outset of the project strategy. Your new residence will definitely conform to all of the building codes but you’ll still need to prepare for the boundary line locations, and obtain all local building permits. Moreover, you must determine soil type and conditions, water table as well as frost line in an effort to produce the design.

Your preparation needs to incorporate buying the ownership of the site as well as pinpointing where you should set your house on the property. Being the owner, you will need to also establish a plan for the development of the perimeter foundation wall structure, that must be correctly square so as to support the modular home upon arrival. One vital item of the program will be to have a 30-foot diameter space located near the foundation and devoid of trees and wires that is completely level in order to position the building crane employed to set in place the modules around the footing.

Kent Stichter Modular Home Consultant

Hello, I am Kent Stichter, your Modular Home Consultant for Barnesville, Ohio. If you have any questions, please call me toll free!

Creating A New Modular Home

Design for your new modular home will begin by determining the Wind Zone, Thermal Zone and Roof Load Zone of your building site. All of these need to be integrated during the layout from the outset, as well as built into any engineering step of your plan. You will need designs for your attached garages, porches or outdoor patios as they’re not part of the modular home plan. is vital for you to list what you need to design for your residence so that it can be established that these will be incorporated into the plan.

There is no limit to the square footage to the plan with modular homes; presently we see designs as large as 1500 to 3000 sq . ft . built in Thirty-two segments, with the typical range between 4,000 to 6,000 square feet within ten to twelve components. Each house plan Express Modular provides are created in this way, including our modular log homes and our many enviro-friendly home options.

Installation of The New Construction

Once the assembly of the sections is finished and they’re transported to your property location we start the important stage of your assembly – the setting of your components by the installation crew using construction crane gear. Once these are placed, the last stage of your installation would be the completion of installing utilities, painting, installation of all the floors, as well as the set-up of your appliances. Cleansing top to bottom and tests makes sure all aspects are in good condition and that the remaining home inspections and occupancy permits will be secured. Usually, all the outer perimeter drive way, porches, paths as well as patio decking are installed to complete the work and then the house is set for moving in.


Building Green

Express Modular residences are made “greener” and are usually even more energy efficient when compared with traditional households in the past. All the heat retaining material as well as additional elements employed in manufacturing are manufactured in the home from the start. Energy-efficient home appliances will be traditional and, with upgrades,your home becomes more green. Both climate-control manufacturing environment and re-cycled materials give further options for an environmentally friendly home. With low flow fittings on faucets, shower heads and sinks, choosing green modular homes shouldn’t be too difficult. You can find many regional and national green home labeling programs throughout the country. Though such programs approach eco-friendly building individually, each incorporates relatively good ideas.

All the insulating material and additional resources employed in manufacturing are manufactured in the your home from inception. Energy efficient appliances seem to be traditional and with upgrades,your residence becomes more green. Both climate control manufacturing setting and reusable supplies give further opportunities for an environmentally friendly home. Using low flow fixtures on faucets, shower heads and sinks, choosing green modular homes shouldn’t be too difficultto make.

We Manufacture Modular Homes in Barnesville

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)