How to Plan Today’s Modular Home

with Express Modular

Modular Building of your own Lynnwood residence will need sizeable and specific investigation which needs to be accomplished in the beginning the project strategy. Your new residence will certainly conform to all local building code requirements but you’ll still need to arrange for the perimeter line locations, and obtain virtually all construction permits. On top of that, you need to find out soil type and conditions, water table and frost line to enable you to create your design.

The planning needs to feature obtaining the property and deciding where you should established the house within the property. As the property owner, you will need to also establish a plan for construction of a perimeter foundation wall structure, which must be properly aligned in order to support the modules upon arrival. One vital piece of your plan is to plan a thirty-foot diameter area located in close proximity to the perimeter foundation that is free from trees and wires that’s perfectly level in order to position the construction crane employed to set in place the modules in position on the foundation.

Don Beck Modular Home Consultant

Hello, I am Don Beck, your Modular Home Consultant for Lynnwood, Washington. If you have any questions, please call me toll free!

Creating Your Modular Home

The design of a new modular home starts with ascertaining the Wind Zone, Thermal Zone and Roof Load Zone of your development site. These need to be integrated within the design from the start, as well as integrated into the engineering step of your design. When planning a modular home, you will need designs for your attached garages, porches or outside patios as they’re not a part of the modular home plan. is very important that you list what you need to design into the home so it can be determined that these can be included into your plan.

There are no limits to the square footage to the plan with modular homes; at present there are designs as large as 1500 to 3000 sq . ft . built in Thirty two segments, with your typical range between four to six thousand sq ft within 10 to 12 sections. Each house plan Express Modular offers are built this way, including our log homes and our many enviro-friendly home options.

Once the construction of the modules is complete and they are transported to your property location we begin the crucial step of your home’s installation – the setting of the sections by the installation team utilizing construction crane equipment. As soon as these are installed, the final stage of your installation is the finishing of the installation of utilities, painting, installation of all the flooring, as well as the installation of the equipment. Cleaning top to bottom and testing makes certain all things are in excellent working order and that the final home inspections and occupancy permits can be completed. Usually, all the outer perimeter entrance, patios, walks and decking are installed to complete the project and the house is set for moving in.


Building Green

Express Modular residences are constructed “greener” and are usually even more energy efficient than conventional homes of the past. The insulating material and additional resources included in manufacturing are manufactured into the house from inception. Energy-efficient appliances are standard and, with upgrades,your residence can become even more green. Both climate-control manufacturing environment as well as reusable components provide added opportunities for an enviro-friendly home. By using low-flow fixtures on faucets, shower heads and sinks, choosing green modular homes is easy. About 50 regional or national green home labeling programs nationally. Though such programs approach eco-friendly construction a little differently, they provide important resources for further study.

The insulating material and other supplies employed in manufacturing are built in the home from inception. Energy-efficient home appliances seem to be common and using upgrades,your residence can become even more green. The climate-control manufacturing setting as well as re-cycled supplies provide further options for an enviro-friendly abode. Using low flow fixtures on faucets, shower heads and sinks, your green modular home environment is complete.

We Manufacture Modular Homes in Lynnwood

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)