What’s Needed When Creating A Modular Home

with Express Modular

Modular Construction of a new Jamison residence will demand considerable and specific preparation that should be done at the outset of process. Your home will conform to all of the local building codes but you will need to prepare for the perimeter line locations, and obtain virtually all usual building permits. On top of that, you will need to find out soil type and conditions, water table along with frost line so as to develop the new design.

Your preparation must involve buying the property and identifying where to set your house within the site. Being the owner, you will need to also establish a plan for construction of a perimeter foundation wall, that must be correctly square to be able to support the modules upon arrival. One vital item of the plan would be to plan a thirty-foot diameter space located close to the foundation and totally free of trees and wires that’s completely level in order to position the construction crane employed to set in place the modules constantly in place on the foundation.

Bill King Modular Home Consultant

Hello, I am Bill King, your Modular Home Consultant for Jamison, Pennsylvania. If you have any questions, please call me toll free!

Designing Your Modular Home

Design for a new modular home will begin by establishing the Wind Zone, Thermal Zone and Roof Load Zone of your development site. These need to be integrated in the design from the outset, and employed in the engineering phase in the plan. You’ll need designs for your attached garages, porches or decks as they are not an element of the modular home design. is vital that you catalog what you want to plan for your residence so it can be determined that these can be incorporated in the design.

There is no limit to the square footage to the plan using modular homes; presently we see designs as big as 1500 to 3000 square feet built in 32 modules, with your common range between four to six thousand sq ft within ten to twelve sections. Each and every house design Express Modular offers are designed this way, including our log homes and our many enviro-friendly home options.

Once the assembly of your sections is done and they are delivered to your home location we start the important step of your assembly – the placing of the sections by the installation crew employing construction crane gear. Once these are installed, the final step of the installment will be the finishing of installing utilities, painting, installation of all the floor coverings, as well as the set-up of your equipment. Cleansing top to bottom and tests makes sure all aspects are in proper condition and the final home inspections as well as occupancy permits will be completed. Generally, all the outer perimeter driveway, porches, paths along with decking are installed to complete the work and then the home is ready for occupancy.


Going Green in Home Building

Express Modular homes are built “greener” and are even more energy efficient as compared to conventional households in the past. The heat retaining material and additional elements included in manufacturing are manufactured into the your home from inception. Energy-efficient appliances seem to be standard and using upgrades,your residence becomes more eco-friendly. Both climate control production environment and re-cycled supplies provide further opportunities for a sustainable home. Using low-flow fixtures on faucets, shower heads and sinks, your totally green modular home environment is complete. About 50 regional or national green home labeling programs throughout the country. While each program approaches environmentally conscious homebuilding in their own way, each incorporates worthwhile information on the topic.

The heat retaining material and additional resources included in production are designed into the house right from the start. Energy efficient home appliances seem to be standard and using upgrades,your home becomes even more green. The climate control manufacturing setting and reusable supplies offer additional possibilities for an environmentally friendly house. By using low-flow fittings on faucets, shower heads and sinks, your totally green modular home environment is complete.

We Manufacture Modular Homes in Jamison

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)