How to Plan Today’s Modular Home

with Express Modular

Modular Construction of your new Fargo dwelling requires considerable and specific investigation which should be accomplished in the beginning process. Your dwelling is going to conform to all of the building codes but you’ll still need to prepare for the boundary line locations, and have all usual building permits. On top of that, you need to identify soil type and conditions, water table along with frost line so as to produce your design.

The preparation must involve purchasing property and determining the best place to set your house within the site. Being the property owner, you must also establish a plan for building of the perimeter foundation wall, which needs to be properly aligned so as to support the modules when installed. One particular essential piece of your program would be to have a thirty-foot diameter space positioned in close proximity to the perimeter foundation that is free from trees and wires that is perfectly level to be able to place the building crane utilized to set the modules in position around the footing.

Don Beck Modular Home Consultant

Hello, I am Don Beck, your Modular Home Consultant for Fargo, North Dakota. If you have any questions, please call me toll free!

Designing Your Modular Home

The design of a new modular home will begin by ascertaining the Wind Zone, Thermal Zone and Roof Load Zone of your construction site. These must be utilized in the layout from the beginning, and built into the engineering phase of the plan. When planning a modular home, you’ll need layouts for your attached car ports, porches or outside patios as they’re included in the modular home design. is significant that you list what you want to design into the home so it can be established that these can be included into the plan.

There are no limits to the size of to the design with modular homes; at present we see layouts as large as 1500 to 3000 sq ft built in Thirty-two modules, with the common range from 4 to 6 thousand sq ft in 10 to 12 components. Each and every home Express Modular provides are constructed in this way, including our log homes and our many enviro-friendly home options.

After the assembly of the sections is complete and they’re transported to your home location we begin the crucial stage of your installation – the placing of your sections by the installation team employing construction crane gear. As soon as they’re placed, the last phase of your set up will be the completion of the installation of utilities, painting, installing the floors, along with the set-up of the home appliances. Cleaning top to bottom and tests makes certain all aspects are in proper condition and the remaining home inspections as well as occupancy permits will be completed. Normally, all the external perimeter driveway, porches, walks along with patio decking are set up to complete the work and the residence is ready for occupancy.


Green Modular Home Construction

Express Modular homes are built “greener” and are more energy-efficient as compared to classic homes in the past. All the insulation and other supplies employed in manufacturing are manufactured in the house from the start. Energy efficient appliances seem to be common and, using upgrades,your home becomes even more eco-friendly. Both climate control manufacturing setting and reclaimed supplies offer further options for a sustainable residence. By using low flow fittings on faucets, shower heads and sinks, the question of green modular homes shouldn’t be too difficultto make. Nearly fifty regional and national green home labeling programs throughout the country. While each program approaches environmentally conscious building a little differently, each incorporates relatively good ideas.

All the insulation as well as additional elements used in manufacturing are designed in the house right from the start. Energy efficient appliances are standard and, with upgrades,your residence can become even more green. Both climate control production setting and reusable supplies offer further possibilities for an enviro-friendly house. By using low-flow fixtures on faucets, shower heads and sinks, your green modular home environment is completed.

We Manufacture Modular Homes in Fargo

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)