Building A Modular Home in Springfield

with Express Modular

With modular construction, your new Springfield residence will need considerable and specific investigation which should be accomplished in the beginning your project strategy. Your abode will conform to all building codes but you’ll still need to arrange for the border line settings, and obtain virtually all local building permits. Furthermore, you will have to identify soil type and conditions, water table and frost line so as to create your design.

Your preparation needs to involve acquiring the property along with identifying where to set the house within the property. As the property owner, you must also create a plan for development of the perimeter foundation wall structure, which needs to be perfectly aligned to be able to support the modular home upon arrival. One essential piece of your program is to have a 30-foot diameter area positioned near the foundation and totally free of trees and wires that is perfectly level in order to position the construction crane utilized to set in place modules in position around the foundation.

Don Beck Modular Home Consultant

Hello, I am Don Beck, your Modular Home Consultant for Springfield, Nebraska. If you have any questions, please call me toll free!

Planning Your Modular Home

The design of a new modular home starts with establishing the Wind Zone, Thermal Zone and Roof Load Zone of the development location. All of these must be incorporated during the layout from the beginning, and built into the engineering step of the design. You will want layouts for any attached garages, porches or outdoor patios as they’re not an element of the modular home design. It is important for you to catalog what you want to design for your residence so that it can be established that these will be included into your plan.

There are no limits to the square footage to the plan using modular homes; at present we see layouts as big as 1500 to 3000 sq . ft . built in 32 segments, with your common range between four to six thousand sq ft in 10 to 12 components. All of the home designs Express Modular sells are constructed this way, including our log homes and our many enviro-friendly home options.

Installation of Your New Structure

When the construction of the modules is complete and they’re brought to your home location we start the crucial step of the assembly – the placing of your components by the assembly team using construction crane gear. As soon as these are positioned, the final phase of the installation will be the finishing the installation of utilities, painting, installing all the floors, as well as the set-up of the appliances. Cleaning and tests makes sure all aspects are in excellent condition and the remaining home inspections and occupancy permits can be completed. Generally, the outer perimeter drive way, porches, paths and patio decking are installed to finish the project and then the residence is set for moving in.


The Eco-Friendly Modular Home

Express Modular residences are built “greener” and are usually more energy efficient when compared with classic households in the past. The insulation as well as additional resources included in manufacturing are built into the residence from the start. Energy efficient appliances are common and, with upgrades,your residence becomes more green. The climate control manufacturing setting and recycled supplies provide further options for an environmentally friendly residence. By using low flow fixtures on faucets, shower heads and sinks, choosing green modular homes is a no-brainer. You can find nearly 50 green home labeling programs around the country. While each program approaches eco-friendly construction in their own way, they all offer relatively good points.

The insulation as well as additional supplies included in production are built in the residence right from inception. Energy-efficient appliances seem to be standard and, with upgrades,your residence becomes even more eco-friendly. Both climate-control manufacturing setting and recycled supplies offer added possibilities for a sustainable residence. Using low flow fixtures on faucets, shower heads and sinks, your totally green modular home environment is complete.

We Manufacture Modular Homes in Springfield

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)