Building A Modular Home in Fort Morgan

with Express Modular

Modular Building of a new Fort Morgan home requires substantive and specific investigation that must be completed in the beginning the project strategy. Your new abode will definitely comply with all of the building code requirements but you will still need to arrange for the boundary line settings, and have virtually all normal construction permits. On top of that, you need to establish soil type and conditions, water table and frost line to be able to create your design.

Your planning ought to involve acquiring the ownership of the site along with deciding where you should set the building on the property. As the owner, you will need to also develop a plan for the construction of a perimeter foundation wall, which needs to be perfectly aligned so as to support the modules when installed. One crucial piece of your program will be to have a 30-foot diameter space situated close to the foundation that is free from trees and wires that’s completely level so that you can position the building crane employed to set the components in position on the foundation.

Don Beck Modular Home Consultant

Hello, I am Don Beck, your Modular Home Consultant for Fort Morgan, Colorado. If you have any questions, please call me toll free!

Planning Your Modular Home

The design of your new modular home starts by ascertaining the Wind Zone, Thermal Zone and Roof Load Zone of the building location. All of these must be integrated in the design from the outset, and built into any engineering phase in the plan. You will need layouts for your attached garage areas, porches or outside patios as they are not an element of the modular home design. is very important that you list what you need to design for your residence so that it can be established that these can be incorporated in the design.

There are no limits to the size of to the design with modular homes; currently there are designs as large as 1500 to 3000 sq ft constructed in Thirty two segments, with your common range between 4,000 to 6,000 square feet in 10 to 12 modules. Each house plan Express Modular sells are constructed in this way, including our log homes and our many enviro-friendly home options.

Beginning Install of A Prefabricated Home

After the assembly of the modules is finished and they’re brought to your building location we begin the important stage of the installation – the placing of the modules by the assembly crew employing construction crane gear. When they’re placed, the last step of your installation is the finishing installing utilities, painting, installing all the floors, along with the create of the home appliances. Cleansing top to bottom and testing ensures everything is in excellent working order and that the remaining home inspections and occupancy permits will be completed. Typically, all the outer perimeter entrance, porches, paths along with patio decking are installed to finish the project and then the home is ready for moving in.


The Eco-Friendly Modular Home

Express Modular residences are built “greener” and are even more energy efficient when compared with conventional households in the past. The heat retaining material as well as additional supplies used in production are manufactured in the your home right from inception. Energy-efficient appliances are standard and using upgrades,your residence becomes more green. The climate-control manufacturing environment and recycled supplies provide additional possibilities for an environmentally friendly house. With low flow fittings on faucets, shower heads and sinks, your totally green modular home environment is complete. There are nearly 50 regional and national green home labeling programs all around the U.S. Though each program approaches green building a little differently, they all offer relatively good info.

All the heat retaining material and other elements included in production are built in the residence from the start. Energy efficient home appliances will be traditional and with upgrades,your residence becomes more eco-friendly. Both climate-control manufacturing setting and re-cycled components offer further possibilities for a sustainable house. By using low flow fittings on faucets, shower heads and sinks, your green modular home environment is complete.

We Manufacture Modular Homes in Fort Morgan

What Our Customers Are Saying

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Mark (Asheville, NC)

  • Our modular log home was easier than we ever could’ve thought. We look forward to years of family gatherings in our new log home.
    Cameron (Xenia, OH)

  • We love our new home. Thank you for making our dreams come true!
    Sandra & Dave (Little Rock, AR)

  • We’d looked over many designs from many builders and the options and prices on a prefabricated home were unbeatable.
    Nancy & Jim (Lubbock, TX)